富士通 LOOX T93C モデムが使えません

[Frank]

こんにちは、

初心者ですが、パピーリナックスはモデムを認識しないので、手伝って頂けるかなと思って、メールをしてみます。
具体的にシステムはモデムをprobeしても、ないと返答します。

１）OS: パピーリナックス 4.1.2
　　カーネル： Linux 2.6.25.16 (i586)

２）パソコン：FMV LOOX T93C
データは
http://www.fmworld.net/product/hard/pcp ... index.html

３）モデム（ウィンドウズから調べたデータ）：Lucent Technologies Soft Modem AMR
AT+GMM H.324 video-ready rev. 1.0
ATI3 Lucent SoftModem Version 3.1.113
ATI5 3.1.113, AMR ALi MB, AC97 ID:SIL REV:0x27,19

４）ModemScanを実行して、結果の通知を以下に貼付けます。

スタートーーーーーーーー
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Puppy Linux
Linux 2.6.25.16 [i586 arch] kernel 2.6.25.16
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i586, Puppy
Linux , ALSA_version=1.0.16
Linux version 2.6.25.16 (root@(none)) (gcc version 4.2.2) #1 Tue Aug 26 10:45:53 GMT-8 2008
scanModem update of: 2010_05_29

/etc/lsb-release not found


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
snd_ali5451 slamr

Checking /proc/bus/usb/devices
USB modem not detected among /proc/bus/usb/devices.

Candidate PCI devices with modem chips are:
00:04.0 Class 0401: 10b9:5451 (rev 01)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:04.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:04.0 10b9:5451 10cf:1177 Class 0401: 10b9:5451

Modem interrupt assignment and sharing:
9: 13884 XT-PIC-XT acpi, ALI 5451, ehci_hcd:usb2, yenta, ohci_hcd:usb3, wifi0, ohci1394, ohci_hcd:usb4, eth0
--- Bootup diagnostics for card in PCI slot 00:04.0 ----
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l" are:
card 0: A5451 [ALI 5451], device 1: ALI 5451 modem [ALI 5451 modem]

The /proc/asound/pcm file reports:
-----------------------
00-01: ALI 5451 modem : ALI 5451 modem : playback 1 : capture 1
00-00: ALI 5451 : ALI 5451 : playback 32 : capture 1

about /proc/asound/cards:
------------------------
0 [A5451 ]: ALI5451 - ALI 5451
ALI 5451 at 0x1000, irq 9
Driver snd-ali5451 supports both audio and modem functions of the ALI5451 card.
see http://linmodems.technion.ac.il/bigarch ... 02665.html about ALSA version issues
If not a Conexant modem, the driver snd-ali5451 with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:04.0:
Modem chipset detected on
NAME="Class 0401: 10b9:5451 "
CLASS=0401
PCIDEV=10b9:5451
SUBSYS=10cf:1177
IRQ=9
SOFT=10b9:5451.MC97
CodecArchived=SIL27
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,1
Driver=snd-ali5451

For candidate modem in: 00:04.0
0401 Class 0401: 10b9:5451
Primary device ID: 10b9:5451
Subsystem PCI_id 10cf:1177
Softmodem codec or chipset from diagnostics:
from Archives: SIL27



Support type needed or chipset: slmodemd

An ALSA (Advanced Linux Sound Architecture) modem driver: snd-ali5451
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd

Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD_gcc4.2_alsa1.0.16.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD_gcc4.2_alsa1.0.16.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa -shw:0,1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

The kernel was compiled with gcc version 4.2.2 and a compiler is not installed

linux-headers-2.6.25.16 resources needed for compiling are not manifestly ready!
The code linking utility, ld, may be needed and is provided in the binutils package
The patch utility is needed for compiling ALSA drivers, and possibly others.

If compiling is necessary packages must be installed, providing:
gcc-4.2 make kernel-source-2.6.25.16


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-r-xr-xr-x 1 root root 318816 2007-10-19 10:44 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmode ... 02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
lock
defaultroute
noipdefault
noauth
usepeerdns
modem
115200
crtscts
debug
asyncmap 0
name "barney"

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch ... 04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:

Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules/firmware.dep.2.6.25.16:#a firmware pkg can have a post-install script -- see slmodem example.
/etc/modules/firmware.dep.2.6.25.16:#analog modem drivers...
/etc/modules/firmware.dep.2.6.25.16:dgcmodem:dgcusbdcp.ko
/etc/modules/firmware.dep.2.6.25.16:ltmodem:ltserial.ko
/etc/modules/firmware.dep.2.6.25.16:slmodem:slamr.ko,slusb.ko,snd-via82xx-modem.ko,snd-atiixp-modem.ko,snd-intel8x0m.ko,snd-hda-intel.ko
--------- end modem support lines --------

終わりーーーーーーー

５） lspci -vvを実行して、結果の通知を以下に貼付けます。

00:00.0 Class 0600: 1279:0395 (rev 03)
Subsystem: 10cf:110e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e8100000 (32-bit, non-prefetchable)

00:00.1 Class 0500: 1279:0396
Subsystem: 10cf:110e
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 Class 0500: 1279:0397
Subsystem: 10cf:110e
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:02.0 Class 0c03: 10b9:5237 (rev 03) (prog-if 10)
Subsystem: 10cf:10a2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8014000 (32-bit, non-prefetchable)
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Class 0401: 10b9:5451 (rev 01)
Subsystem: 10cf:1177
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1000
Region 1: Memory at e8015000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Class 0680: 10b9:7101
Subsystem: 10cf:10a3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:07.0 Class 0601: 10b9:1533
Subsystem: 10b9:1533
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Class 0c03: 1033:0035 (rev 41) (prog-if 10)
Subsystem: 10cf:11a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 28020000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.1 Class 0c03: 1033:0035 (rev 41) (prog-if 10)
Subsystem: 10cf:11a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max)
Interrupt: pin B routed to IRQ 9
Region 0: Memory at 28021000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.2 Class 0c03: 1033:00e0 (rev 02) (prog-if 20)
Subsystem: 10cf:11a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 68 (4000ns min, 8500ns max), cache line size 08
Interrupt: pin C routed to IRQ 9
Region 0: Memory at 28023000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Class 0607: 104c:ac50 (rev 01)
Subsystem: 10cf:10c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 20
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 28022000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

00:0f.0 Class 0101: 10b9:5229 (rev c3) (prog-if fa)
Subsystem: 10cf:10a4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
Region 4: I/O ports at 1800 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 Class 0200: 10ec:8139 (rev 10)
Subsystem: 10cf:111c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 8000 [size=256]
Region 1: Memory at e8016800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Class 0280: 1260:3873 (rev 01)
Subsystem: 10cf:1169
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8017000 (32-bit, prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 Class 0c00: 104c:8026 (prog-if 10)
Subsystem: 10cf:1162
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8016000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+

00:14.0 Class 0300: 1002:4c59
Subsystem: 10cf:11c8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 1400 [size=256]
Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 28000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

終わりーーーーーーー


よろしくお願いします。

Frank

[みのむし]

○必要な情報

• プロバイダ名
• モデムの型番、モデル名
• モデムとPCの接続方法
• 簡単なネットワーク接続概略図
  推定)
  NTT電話回線 - モデム -<RS-232C>- PC[RS-232Cポート]※1
  ↑
  ADSL？

※1 BIOSの設定で、このRS-232Cポートが有効に設定されているかどうか確認する事

＞３）モデム（ウィンドウズから調べたデータ）：Lucent Technologies Soft Modem AMR

Windows のSoft ModemはLinuxでは多分使用出来ません。

[シノバー]

本家フォーラムにこんな記事があります。
http://www.murga-linux.com/puppy/viewtopic.php?t=55794
4.1xに関してはよく分かりませんが……。
最近のバージョンでは 4.3.1がモデムへの対応がいちばんよろしいようです。
4.3.1日本語版や 4.3.1JPqs3なども収録するドライバなどは同じはずです。

[Frank]

色々な返事ありがとうございます。
早速質問に答えます：

１）プロバイダ名
未定です。FMV LOOXは小さくて古いノートパソコンなので、海外出張に行く時、持って行こうと思っているので、準備をしています。

２）モデムの型番、モデル名
内臓のWinmodem
Lucent Technologies Soft Modem AMR Version 3.1.113

３）モデムとPCの接続方法
内蔵モデム、以前発表したscanmodemの結果書にirq9と書いています。

４）簡単なネットワーク接続概略図
RJ11のケーブルで電話回線につなげると思います。

パソコン　--> コード　--> RJ11壁のジャック

５）NTT電話回線 - モデム -<RS-232C>- PC[RS-232Cポート]
内蔵モデムなので適用されるのでしょうか。

６）Windows のSoft ModemはLinuxでは多分使用出来ません。

2005年のデータに基づいたらそうです。フォーラムにある2010年のメールで、なんとか問題解決方法がでそうでしたから...

>最近のバージョンでは 4.3.1がモデムへの対応がいちばんよろしいようです。
>4.3.1日本語版や 4.3.1JPqs3なども収録するドライバなどは同じはずです。

ありがとうございます。１年以上前パピーのライブCDをダウンロードしたので、4.1.2のリリースを使っています。最近だけ手がけることができることになったので、古いバージョンんを使っています。もう少しシステムになれて行ったら、4.3.1か5.0をインストールしてみようと思います。